Epoxy Resin Jewellery Making Starter Kit. All you need to make your own Resin Art Jewellery using the ClearCast Water Clear Doming Resin and introduce yourself to creative Resin Art.
This resin is used to make Resin Art Projects, Jewellery Making and the Embedding of Collectables and Dried Flowers. Add Mica Pigments, Alcohol Inks, Glitters and Glow in the Dark Pigments for stunning results.
This Kit Includes
300g Epoxy Doming Resin
2 x 600ml Calibrated Mixing Cups
2 x 60ml Calibrated Mixing Pots
4 x Mixing Sticks
4 x Nitrile gloves
2 x Selected Silicone Jewellery Moulds
2 Selected Mica Pigment Powders
10 Dried Flowers and Dried Foliage
5 Open Jewellery Bezels
1 Pair of Tweesers
The Mixing Ratio of this Doming resin is 100 - 50. 100 units of Part A to 50 Units of Part B by Weight. Using an accurate set of scales to measure your resin would be essential as the ratio does need to be accurate.
Dependant on the ambient working temperature the cure time can be between 6 - 12 hrs. For best results leave your project for at least 48hrs. If you are doing multiple pours check your project has a gel consistency before subsequent pours. This can take from 1 - 4hrs for the resin to gel depending on the ambient working temperature.
Extra Low Viscosity
Good UV Resistance
Excellent Detail Capability
Polishable to a High Gloss Finish
This Epoxy Resin is suited for pours between 2mm - 5mm. Due to the High Viscocity this resin can produce wonderful "Doming" effects when using with Open and Closed Back Bezels and Silicone Moulds. Multiple Pours will allow you to build up layers and encapsulate Dried Flowers, Glitters, Metallic Flakes creating stunning and unique looking Jewellery projects. This technique leaves no visible marks between each Pour. You can also pour up to 150g to 200g in one pour. This is useful for filling Silicone Spheres, Pyramids or any other Silicone Moulds in One Go.
In any doubt please call 01752 658498 for expert advice.